Power Line Supply

Wire Stripping Tools 140 1-800-832-2297 ELBOW PROBE INSERTION TOOLS Load Break For use with 15 to 34.5 kV elbows. Prevents probe contamination and breakage. Reduces cross threading. Features removable T-han- dle, 1” steel drive, adjustable wrench, 3/8” square drive socket and Penta head. METER BASE TORQUING TOOLS Allows for proper installation of Landis & Gyr “K” Base 3 Phase or similar meters without shorting, sparking or flashover. Insulated and isolated from meter base with composite shaft which is rated 1000V. BUSHING INSERT TOOLS Provides preset torque for installation and removal of bushing inserts with a 5/16” internal hex socket. BUSHING INSERT TOOLS Provides preset torque for installation and removal of 600A reducing tap plug bushings with 5/16” internal hex socket. Available in both T-Hand (AT) and OP eye ((AH) versions. NEUTRAL WINDERS Cable Designed to remove the outer jacket on under- ground power cable with embedded neutral wires. Prevents damage and/or breakage of the neutral wire. Not for cable with Mylar plas- tic or tape layer between the neutral wire and jacket. Includes 3.8” drive in hub. SPLICE ASSEMBLIES Designed to ease installation and assembly of molded rubber splice components. Available with 3/4” hex drive or combination 3/4”/3/8” hex drive. No. Torque In.-Lbs. Lgth. In. 35150 125 9.375 No. Lgth. In. 36390 13-3/4 No. Description BIT/E180AT OP Eye No. Description LRTP/TK240AH OP Eye LRTP/TK240AT T-Handle No. Cable OD In. NW-15 1 to 2.5 NW-35 2.25 to 3.5 No. Stroke In. Cable Cap. In. SAT 15 0.75 to 2.625